Help

How to measure, choose and fit.

Short answers. The full measure guide is on the measure page. The install guide is on the DIY install page.

Measuring a standard window

Width at top, middle and bottom. Drop at left, centre and right. Write the smallest of each. Send the opening sizes. Full guide.

Bay windows

Left, centre and right as three openings. Use one height for the whole bay, the lowest one, so the heads line up. Write the corner angle if it isn't 90°. Bay steps.

Corner windows

Measure each leg as its own opening. Don't add the widths. Say whether the panels meet in the room or wrap the pier.

Arches and rakes

Width at the sill. Left height, right height, peak if it's a double rake. For an arch, height at the crown, then a height every 100 mm out from centre. Attach a photo.

Sliding, bi-fold and French doors

These go on the quote form as the type. Sliding and bi-fold doors are quoted separately. They're not on the standard $50 fit rate.

Choosing a frame

Inside L sits in a deep, square opening. Inside Z sits in the opening and covers a small gap on the plaster. Face sits on the architrave when the opening is too tight or under about 50 mm deep. The quote recommends one from your answers.

Choosing a material

PVC for kitchens, bathrooms and coastal air. Paulownia for a light timber look in dry rooms. Basswood for living rooms and bedrooms. Aluminium for large or weather-facing openings. Ranges.

Fitting

Most people fit them themselves. Panels arrive finished. You set the modular frame, then fit the panels. Or we fit them: $50 a panel on standard windows, minimum $200, maximum $1,000. Fitting page.

Care and cleaning

Dust the louvres. Wipe PVC with a damp cloth. Don't soak timber. Touch-up is in the crate.

Delivery

Sydney metro, Central Coast and Newcastle $150 flat, free on orders of 15 m² or more. Collect $0. Delivery page.

Warranty

Five years on PVC and aluminium. Three years on timber finishes in dry rooms. Timber in a wet room isn't covered. Warranty page.